在圓角管的生產過程中，工人與鋼渣、鋼水及火焰接觸的機會多，發生灼傷燒傷的危險性較大。特別是在機械化不夠、體力勞動較多的情況下，如出渣、加料、打開出鋼口和澆鑄鋼錠的過程中最易發生燒傷。最有效的防止燒傷的辦法是實行機械化操作，同時加強個人防護。

In the production process of round corner pipe, workers have more opportunities to contact with steel slag, molten steel and flame, and the risk of burning is greater. Especially in the case of insufficient mechanization and more manual labor, burns are most likely to occur in the process of slag discharge, feeding, opening tap and ingot casting. The most effective way to prevent burns is to carry out mechanized operation while strengthening personal protection. 圓角管生產中可能引起煤氣爆炸及鋼水爆炸事故。加料時，要禁止加濕料，注意原材料內是否有。煤氣管道應保持正常壓力，盛鋼水的鋼水罐要烘干，地面不可有水或過于潮濕。

Gas explosion and molten steel explosion may occur in the production of round corner pipe. When feeding, moisturizing materials should be prohibited, and attention should be paid to whether there is any in the raw materials. The gas pipeline should maintain normal pressure, the steel tank for holding molten steel should be dried, and the ground should not be watery or too wet.